进口塑胶料
注:请在右边的搜索栏查找产品

PA6 HFX 33 挤出级

添加时间:2013-09-10  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料
Ultramid PA6 HFX 33
Ultramid® PA6 HFX 33
聚酰胺6
BASF Corporation
 
产品说明
Ultramid HFX 33 is a polyamide specialty extrusion resin combining high flexibility, excellent burst performance and outstanding chemical resistance. It offers high melt strength and enhanced heat stability.
 
Applications
Ultramid HFX 33 is recommended for tubing applications requiring an outstanding balance of flexibility, chemical and heat resistance and burst performance.
 
材料特点:良好的熔体强度,良好的柔韧性,耐化学,热稳定
材料用途:管道
加工方法:挤出
塑料牌号:PA6 HFX 33
定属记号:尼龙6
代理销售:苏州希普能工程塑料 185 5121 3137 谭经理
 
物料数据
物理性能 额定值 单位制 测试方法
密度 1.04 g/cm³ ISO 1183
机械性能 额定值 单位制 测试方法
拉伸模量(23℃) 430 MPa ISO 527-2
拉伸应力(断裂,23℃) 40.0 MPa ISO 527-2
标称拉伸断裂应变(23℃) 300 % ISO 527-2
弯曲模量(23℃) 400 MPa ISO 178
冲击性能 额定值 单位制 测试方法
简支梁缺口冲击强度(23℃) 120 kJ/m² ISO 179
悬壁梁缺口冲击强度(23℃) 90 kJ/m² ISO 180
热性能 额定值 单位制 测试方法
热变形温度(1.8 MPa,未退火) 40.0 ISO 75-2/A
溶融温度(DSC) 220 ISO 3146
挤出 额定值 单位制
干燥温度 65.0
干燥时间 2.0 到 4.0 hr
建议的最大水分含量 0.10 %
料筒1区温度 225 到 245
料筒3区温度 225 到 250
料筒5区温度 225 到 245
法兰温度 230 到 245
熔体温度 225 到 245
头部温度 230 到 245
口模温度 230 到 245
挤出机螺杆长径比L / D 20.0:1.0 to 24.0:1.0  
挤出机螺杆压缩比 3.5:1.0 to 4.0:1.0  
挤压说明
Screw Parameters
· Metering Section : 40%
· Transition Section : 3 to 4 flights
· Feed Section : balance of screw length
Ultramid® polyamides are molding compounds based on PA 6, PA 66 and copolyamides such as PA 66/6. Due to their outstanding properties these materials have become indispensable in almost all fields of engineering for the most varied components and machine parts, as high-quality electrical insulating materials and for many special applications.
联系湘樟塑料
相关材料
上一页:PA6 HFX 35 挤出级           下一页:PA6 BU50I 高抗冲击,耐低温撞击