进口塑胶料
注:请在右边的搜索栏查找产品

PA6 7304 NC010 中等粘度

添加时间:2013-11-03  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料
Zytel 7304 NC010
Zytel® 7304 NC010 | PA6 NYLON RESIN
 
Characteristics
 
Regional Availability
North America, South and Central America
 
Processing
Injection Moulding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion, Coatable
 
Delivery form
Pellets
 
Product Text
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
 
The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
 
Zytel® 7304 NC010 is a medium viscosity, unlubricated polyamide 6  resin for extrusion applications.
 
Injection molding
 
PREPROCESSING
Drying recommended = Yes, if moisture content of resin exceeds recommended level
Drying temperature = 80℃
Drying time, dehumidified dryer = 2-4 h
Processing moisture content = <0.05 %
 
PROCESSING
Melt temperature optimum = 270℃
Melt temperature range = 260-280℃
Mould temperature optimum = 70℃
Mould temperature range = 50-90℃
 
Profile extrusion
 
PREPROCESSING
Drying recommended = Yes, if moisture content of resin exceeds recommended level
Drying temperature = 80℃
Drying time, dehumidified dryer = 4-6 h
Processing moisture content = <0.05 %
 
PROCESSING
Melt temperature optimum = 235℃
Melt temperature range = 230-240℃
 
PROPERTIES
Rheological calc. properties Value Unit Test Standard
Mech Min. mould temperature 50 -
Min. melt temperature 260 -
Thermal properties dry / cond Unit Test Standard
Therm Melting temperature,10℃/min 220 / * ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa 160 / * ISO 75-1/-2
Temp. of deflection under load,0.45 MPa 65 / * ISO 75-1/-2
Rheological calc. properties Value Unit Test Standard
RheoCalc Min. mould temperature 50 -
Min. melt temperature 260 -

联系湘樟塑料

相关材料
上一页:PA6 7331J NC010 润滑级           下一页:PA6 TG7S 含34%玻纤,抗冲击,热稳定