进口塑胶料
注:请在右边的搜索栏查找产品

PA6 74G33W BK196 含33%玻纤,光稳定

添加时间:2013-11-03  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料

Zytel 74G33W BK196

Zytel® PA6 74G33W BK196 | (PA66+PA6)-GF33 NYLON RESIN
 
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa, Global
 
Processing
Injection Moulding
 
Delivery form
Pellets
 
Special characteristics
Light stabilised or stable to light, U.V. stabilised or stable to weather
 
Product Text
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
 
The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
 
Zytel® 74G33W BK196 is a high gloss automotive weatherable black 33% glass reinforced nylon 66 and nylon 6 comelt resin.
 
Injection molding
PREPROCESSING
Drying recommended = Yes, if moisture content of resin exceeds recommended level
Drying temperature = 80℃
Drying time, dehumidified dryer = 2-4 h
Processing moisture content = <0.2 %
 
PROCESSING
Melt temperature optimum = 290℃
Melt temperature range = 280-300℃
Mould temperature optimum = 100℃
Mould temperature range = 70-120℃
Maximum Screw tangential Speed : 0.3 m/s
Flow front speed : 300 mm/s
Hold pressure optimum : 85 MPa
Hold pressure range : 50-100 MPa
Back pressure : low
Hold pressure time : 2.5 s/mm
Maximum hold-up time : 10 min
 
PROPERTIES
Rheo Rheological properties dry / cond Unit Test Standard
Moulding shrinkage,parallel 0.1 / * % ISO 294-4,2577
Moulding shrinkage,normal 0.7 / * % ISO 294-4,2577
Mech Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 10000 / 7080 Mpa ISO 527-1/-2
Stress at break 185 / 125   ISO 527-1/-2
Strain at break 3 / 6   ISO 527-1/-2
Flexural Modulus 8900 / -   ISO 178
Charpy impact strength     ISO 179/1eU
23℃ 85 / 100 kj/㎡
-30℃ 70 / 65 kj/㎡
Charpy notched impact strength     ISO 179/1eA
23℃ 12 / 18 kj/㎡
-30℃ 10 / 10 kj/㎡
-40℃ 10 / - kj/㎡
lzod notched impact strength     ISO 180/1A
23℃ 12 / - kj/㎡
-40℃ 11 / - kj/㎡
lzod impact strength,23℃ 80 / - kj/㎡ ISO 180/1U
Therm Thermal properties dry / cond Unit Test Standard
Melting temperature,10℃/min 255 / * ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa 225 / * ISO 75-1/-2
Temp. of deflection under load,0.45 MPa 250 / * ISO 75-1/-2
Coeff. of linear therm. expansion,parallel 14 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion,normal 108 / * E-6/K ISO 11359-1/-2
Other Other properties dry / cond Unit Test Standard
Density 1390 / - kg/m³ ISO 1183
RheoCalc Rheological calc. Properties Value Unit Test Standard
Min. mould temperature 70 -
Max. mould temperature 120 -
Min. melt temperature 280 -
Max. melt temperature 300 -
VDA VDA Properties Value Unit Test Standard
Weather stability delta l -4.7[1] - DIN 53236
Weather stability delta a -0.15[2] - DIN 53236
Weather stability delta b -0.8[3] - DIN 53236
Weather stability delta E 4.7[4] - DIN 53236
1: Without washing 2: Without washing 3: Without washing 4: Without washing

联系湘樟塑料

相关材料