PA66 10B40HS1 BK061 含40%矿物增强,热稳定

添加时间：2013-11-05 信息来源：http://www.xzslw.com/ 作者：苏州希普能塑料

Minlon PA66 10B40HS1 BK061

Minlon® 10B40HS1 BK061 | PA66-MD40 MINERAL REINFORCED NYLON RESIN

Regional Availability

North America, South and Central America

Processing

Injection Moulding

Delivery form

Pellets

Additives

Release agent

Product Text

Common features of Minlon® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage.

Grades with improved electrical and flammability properties are available within the Zytel® nylon resin product line. In addition, Minlon® nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.

The good melt stability of Minlon® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Minlon® nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.

Minlon® 10B40HS1 BK061 is a 40% mineral reinforced, heat stabilized, black polyamide 66 resin for injection molding.

Injection molding

PREPROCESSING

Drying recommended = Yes, if moisture content of resin exceeds recommended level

Drying temperature = 80°C

Drying time, dehumidified dryer = 2-4 h

Processing moisture content = <0.2 %

PROCESSING

Melt temperature optimum = 295°C

Melt temperature range = 285-305°C

Mould temperature optimum = 100°C

Mould temperature range = 70-120°C

Maximum Screw tangential Speed : 0.15 m/s

Flow front speed : 100 mm/s

Hold pressure optimum : 70 MPa

Hold pressure range : 40-100 MPa

Back pressure : low

Hold pressure time : 3 s/mm

Maximum hold-up time : 12 min

PROPERTIES

Rheological properties	dry / cond	Unit	Test Standard
Moulding shrinkage,parallel	0.4 / *	%	ISO 294-4,2577
Moulding shrinkage,normal	0.9 / *	%	ISO 294-4,2577
Mechanical properties	dry / cond	Unit	Test Standard
Tensile Modulus	10000 / -	Mpa	ISO 527-1/-2
Stress at break	95 / -	Mpa	ISO 527-1/-2
Strain at break	2.5 / -	%	ISO 527-1/-2
Flexural Modulus	9500 / -	Mpa	ISO 178
Charpy notched impact strength			ISO 179/1eA
23℃	3 / -	kj/㎡
-40℃	2 / -	kj/㎡
lzod notched impact strength			ISO 180/1A
23℃	3.5 / -	kj/㎡
-40℃	2.5 / -	kj/㎡
Thermal properties	dry / cond	Unit	Test Standard
Melting temperature,10℃/min	263 / *	℃	ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa	205 / *	℃	ISO 75-1/-2
Temp. of deflection under load,0.45 MPa	240 / *	℃	ISO 75-1/-2
Coeff. of linear therm. expansion,parallel	36 / *	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion,normal	66 / *	E-6/K	ISO 11359-1/-2
Flammability	dry / cond	Unit	Test Standard
Burning Behav. at thickness h	HB / *	class	IEC 60695-11-10
Thickness tested	0.7 / *	mm	IEC 60695-11-10
Other properties	dry / cond	Unit	Test Standard
Density	1510 / -	kg/m³	ISO 1183