进口塑胶料
注:请在右边的搜索栏查找产品

PA66 22C BK086 含矿物和玻璃增强,热稳定

添加时间:2013-11-04  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料
Minlon PA66 22C BK086
Minlon® 22C BK086 | PA66-(MD+GF)38 MINERAL REINFORCED NYLON RESIN
 
Regional Availability
North America, Asia Pacific, South and Central America
 
Product Text
Common features of Minlon® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage.
Grades with improved electrical and flammability properties are available within the Zytel® nylon resin product line. In addition, Minlon® nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.
 
The good melt stability of Minlon® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Minlon® nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.
 
Minlon® 22C BK086 is a 38% mineral/glass reinforced, heat stabilised, black polyamide 66 resin for injection molding. 
 
PROPERTIES
Rheological properties dry / cond Unit Test Standard
Rheo Moulding shrinkage,parallel 0.6 / * % ISO 294-4,2577
Moulding shrinkage,normal 0.8 / * % ISO 294-4,2577
Mechanical properties dry / cond Unit Test Standard
Mech Tensile Modulus 7500 / 5000 Mpa ISO 527-1/-2
Stress at break 120 / 72 Mpa ISO 527-1/-2
Strain at break 2.5 / 4 % ISO 527-1/-2
Flexural Modulus 7000 / - Mpa ISO 178
Charpy notched impact strength,23℃ 3 / - kj/㎡ ISO 179/1eA
lzod notched impact strength     ISO 180/1A
23℃ 4 / - kj/㎡
-40℃ 3.4 / - kj/㎡
Thermal properties dry / cond Unit Test Standard
Therm Melting temperature,10℃/min 263 / * ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa 230 / * ISO 75-1/-2
Temp. of deflection under load,0.45 MPa 255 / * ISO 75-1/-2
Coeff. of linear therm. expansion,parallel 41 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion,normal 62 / * E-6/K ISO 11359-1/-2
Flammability dry / cond Unit Test Standard
Flam Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 0.8 / * mm IEC 60695-11-10
Electrical properties dry / cond Unit Test Standard
Elec Comparative tracking index 475 / - - IEC 60112
Other properties dry / cond Unit Test Standard
Other Density 1450 / - kg/m³ ISO 1183
VDA Properties Value Unit Test Standard
VDA Burning rate,Thickness 1 mm 23[1] mm/min ISO 3795 (FMVSS 302)
1:SE/B      
联系湘樟塑料
相关材料