PA66 101L BKB009 润滑级聚酰胺66树脂

添加时间：2013-11-16 信息来源：http://www.xzslw.com/ 作者：苏州希普能塑料

杜邦PA66 101L BKB009

Zytel® 101L BKB009 | PA66 NYLON RESIN

Regional Availability

North America, South and Central America

Processing

Injection Moulding

Product Text

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel® 101L BKB009 is a lubricated polyamide 66 resin for injection molding.

PROPERTIES

Mechanical properties	dry / cond	Unit	Test Standard
Tensile Modulus	3050 / -	MPa	ISO 527-1/-2
Yield stress	88 / -	MPa	ISO 527-1/-2
Yield strain	4.6 / -	%	ISO 527-1/-2
Nominal strain at break	16 / -	%	ISO 527-1/-2
Charpy impact strength,23℃	203 / -	kJ/m²	ISO 179/1eU
Charpy impact strength,-30℃	134 / -	kJ/m²	ISO 179/1eU
Charpy notched impact strength,23℃	4 / -	kJ/m²	ISO 179/1eA
Charpy notched impact strength,-30℃	3.7 / -	kJ/m²	ISO 179/1eA
Thermal properties	dry / cond	Unit	Test Standard
Melting temperature,10℃/min	262 / *	℃	ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa	70 / *	℃	ISO 75-1/-2
Temp. of deflection under load,0.45 MPa	200 / *	℃	ISO 75-1/-2
Flammability	dry / cond	Unit	Test Standard
Burning Behav. at thickness h	V-2 / *	class	IEC 60695-11-10
Thickness tested	0.7 / *	mm	IEC 60695-11-10
Glow Wire Flammability Index,0.75mm	960 / -	℃	IEC 60695-2-1/2
Glow Wire Flammability Index,1.5mm	960 / -	℃	IEC 60695-2-1/2
Glow Wire Flammability Index,3mm	960 / -	℃	IEC 60695-2-1/2
Glow Wire Ignition Temperature,0.75mm	725 / -	℃	IEC 60695-2-1/3
Glow Wire Ignition Temperature,1.5mm	750 / -	℃	IEC 60695-2-1/3
Glow Wire Ignition Temperature,3mm	800 / -	℃	IEC 60695-2-1/3
Other properties	dry / cond	Unit	Test Standard
Density	1140 / -	kg/m³	ISO 1183

Chemical Media Resistance
Acids
√ Acetic Acid (5% by mass) (23℃)
√ Citric Acid solution (10% by mass) (23℃)
√ Lactic Acid (10% by mass) (23℃)
× Hydrochloric Acid (36% by mass) (23℃)
× Nitric Acid (40% by mass) (23℃)
× Sulfuric Acid (38% by mass) (23℃)
× Sulfuric Acid (5% by mass) (23℃)
× Chromic Acid solution (40% by mass) (23℃)
Bases
× Sodium Hydroxide solution (35% by mass) (23℃)
√ Sodium Hydroxide solution (1% by mass) (23℃)
√ Ammonium Hydroxide solution (10% by mass) (23℃)
Alcohols
√ Isopropyl alcohol (23℃)
√ Methanol (23℃)
√ Ethanol (23℃)
Hydrocarbons
√ n-Hexane (23℃)
√ Toluene (23℃)
√ iso-Octane (23℃)
Ketones
√ Acetone (23℃)
Ethers
√ Diethyl ether (23℃)
Mineral oils
√ SAE 10W40 multigrade motor oil (23℃)
× SAE 10W40 multigrade motor oil (130℃)
× SAE 80/90 hypoid-gear oil (130℃)
√ Insulating Oil (23℃)
Standard Fuels
√ ISO 1817 Liquid 1 (60℃)
√ ISO 1817 Liquid 2 (60℃)
√ ISO 1817 Liquid 3 (60℃)
√ ISO 1817 Liquid 4 (60℃)
√ Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23℃)
√ Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23℃)
√ Diesel fuel (pref. ISO 1817 Liquid F) (23℃)
× Diesel fuel (pref. ISO 1817 Liquid F) (90℃)
× Diesel fuel (pref. ISO 1817 Liquid F) (>90℃)
Salt solutions
√ Sodium Chloride solution (10% by mass) (23℃)
× Sodium Hypochlorite solution (10% by mass) (23℃)
√ Sodium Carbonate solution (20% by mass) (23℃)
√ Sodium Carbonate solution (2% by mass) (23℃)
× Zinc Chloride solution (50% by mass) (23℃)
Other
√ Ethyl Acetate (23℃)
× Hydrogen peroxide (23℃)
× DOT No. 4 Brake fluid (130℃)
× Ethylene Glycol (50% by mass) in water (108℃)
√ 1% nonylphenoxy-polyethyleneoxy ethanol in water (23℃)
√ 50% Oleic acid + 50% Olive Oil (23℃)
√ Water (23℃)
× Water (90℃)
× Phenol solution (5% by mass) (23℃)

Symbols used:
√ possibly resistant
Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).

× not recommended - see explanation
Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).