进口塑胶料
注:请在右边的搜索栏查找产品

PA66 444AHS BK152 增韧级,热稳定,高流量

添加时间:2013-11-19  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料

杜邦PA66 444AHS BK152

Zytel® 444AHS BK152 | PA66-I NYLON RESIN
 
Regional Availability
North America, South and Central America
 
Processing
Injection Moulding
 
Delivery form
Pellets
 
Special characteristics
Heat stabilised or stable to heat
 
Product Text
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
 
The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
 
Zytel® 444AHS is a toughened, heat stabilised, black polyamide 66  resin for injection moulding. It is a high flow, processing friendly material.
 
Injection molding
PREPROCESSING
Drying recommended = Yes, if moisture content of resin exceeds recommended level
Drying temperature = 80℃
Drying time, dehumidified dryer = 2-4 h
Processing moisture content = <0.2 %
 
PROCESSING
Melt temperature optimum = 290℃
Melt temperature range = 280-300℃
Mould temperature optimum = 70℃
Mould temperature range = 50-90℃
 
PROPERTIES
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 2400 / 1100 MPa ISO 527-1/-2
Yield stress 62 / 40 MPa ISO 527-1/-2
Yield strain 5.5 / 15 % ISO 527-1/-2
Nominal strain at break 25 / >50 % ISO 527-1/-2
Strain at break 40 / * % ISO 527-1/-2
Thermal properties dry / cond Unit Test Standard
Melting temperature,10℃/min 260 / * ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa 65 / * ISO 75-1/-2
Coeff. of linear therm. expansion,parallel 90 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion,normal 100 / * E-6/K ISO 11359-1/-2
Other properties dry / cond Unit Test Standard
Water absorption,2mm 1.3 / * % Sim. to ISO 62
Density 1110 / - kg/m³ ISO 1183

联系湘樟塑料