PA66 79G13HSL BK039 含13%玻纤,热稳定,增韧级

添加时间：2013-11-19 信息来源：http://www.xzslw.com/ 作者：苏州希普能塑料

DuPont PA66 79G13HSL BK039

Zytel® 79G13HSL BK039 | PA66-I-GF13 NYLON RESIN

Regional Availability

Europe, Near East/Africa

Processing

Injection Moulding

Product Text

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel® 79G13HSL BK039 is a 13 % glass reinforced, heat stabilised, lubricated slightly toughened black polyamide 66 for injection moulding. It has improved impact resistance.

PROPERTIES

Rheological properties	dry / cond	Unit	Test Standard
Moulding shrinkage,parallel	0.5 / *	%	ISO 294-4,2577
Moulding shrinkage,normal	0.8 / *	%	ISO 294-4,2577
Mechanical properties	dry / cond	Unit	Test Standard
Tensile Modulus	5100 / 3700	MPa	ISO 527-1/-2
Stress at break	115 / 67	MPa	ISO 527-1/-2
Strain at break	4 / 10	%	ISO 527-1/-2
Charpy impact strength,23℃	67 / 59	kJ/m²	ISO 179/1eU
Charpy impact strength,-30℃	59 / 54	kJ/m²	ISO 179/1eU
Charpy notched impact strength,23℃	8 / 12	kJ/m²	ISO 179/1eA
Charpy notched impact strength,-30℃	6 / 6	kJ/m²	ISO 179/1eA
Thermal properties	dry / cond	Unit	Test Standard
Melting temperature,10℃/min	262 / *	℃	ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa	240 / *	℃	ISO 75-1/-2
Temp. of deflection under load,0.45 MPa	260 / *	℃	ISO 75-1/-2
Flammability	dry / cond	Unit	Test Standard
Burning Behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
Thickness tested	1.5 / *	mm	IEC 60695-11-10
Burning Behav. at thickness h	HB / *	class	IEC 60695-11-10
Thickness tested	0.8 / *	mm	IEC 60695-11-10
Other properties	dry / cond	Unit	Test Standard
Density	1210 / -	kg/m³	ISO 1183
VDA Properties	Value	Unit	Test Standard
Burning rate,Thickness 1 mm	24	mm/min	ISO 3795(FMVSS 302)
Emission of organic compounds	13	µgC/g	VDA 277
Odour	4	class	VDA 270