产品分类
PRODUCT CATEGORY产品搜索
PRODUCT SEARCH
PA66 FG70G50HSLA BK309 含50%玻纤,热稳定
物理性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
密度 | 1.57 | -- | g/cm³ | ISO 1183 |
收缩率 | ISO 294-4 | |||
垂直流动方向 | 0.80 | -- | % | |
流动方向 | 0.30 | -- | % | |
吸水率 | ISO 62 | |||
23℃,24 hr,2.00 mm | 4.2 | -- | % | |
平衡,23℃,2.00 mm,50% RH | 1.2 | -- | % | |
粘数 | 100 | -- | cm³/g | ISO 307 |
机械性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
拉伸模量 | 17000 | 13000 | MPa | ISO 527-2 |
拉伸应力(断裂) | 250 | 190 | MPa | ISO 527-2 |
拉伸应变(断裂) | 2.3 | 3.2 | % | ISO 527-2 |
拉伸蠕变模量 | ISO 899-1 | |||
1 hr | -- | 10000 | MPa | |
1000 hr | -- | 8000 | MPa | |
冲击性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
简支梁缺口冲击强度 | ISO 179/1eA | |||
-30℃ | 15 | 14 | kJ/m² | |
23℃ | 18 | 20 | kJ/m² | |
简支梁无缺口冲击强度 | ISO 179/1eU | |||
-30℃ | 90 | 90 | kJ/m² | |
23℃ | 100 | 110 | kJ/m² | |
热性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
热变形温度 | ||||
0.45 MPa,未退火 | 262 | -- | ℃ | ISO 75-2/B |
1.8 MPa,未退火 | 260 | -- | ℃ | ISO 75-2/A |
玻璃转化温度3 | 80.0 | -- | ℃ | ISO 11357-2 |
维卡软化温度 | 255 | -- | ℃ | ISO 306/B50 |
熔融温度3 | 262 | -- | ℃ | ISO 11357-3 |
线形热膨胀系数 | ISO 11359-2 | |||
流动 | 1.5E-5 | -- | cm/cm/℃ | |
横向 | 7.5E-5 | -- | cm/cm/℃ | |
导热系数 | 0.46 | -- | W/m/K | |
电气性能 | 干燥 | 调节后的 | 单位制 | 测试方法 |
表面电阻率 | -- | 4.0E+14 | ohm | IEC 60093 |
体积电阻率 | 1.0E+15 | -- | ohm·cm | IEC 60093 |
可燃性 | 干燥 | 调节后的 | 单位制 | 测试方法 |
可燃性等级 | IEC 60695-11-10,-20 | |||
0.850 mm | HB | -- | ||
1.50 mm | HB | -- | ||
极限氧指数 | 24 | -- | % | ISO 4589-2 |
充模分析 | 干燥 | 调节后的 | 单位制 | 测试方法 |
熔体密度 | 1.40 | -- | g/cm³ | |
Specific Heat Capacity of Melt | 1870 | -- | J/kg/℃ | |
Thermal Conductivity of Melt | 0.31 | -- | W/m/K | |
补充信息 | 干燥 | 调节后的 | 单位制 | 测试方法 |
Emission of Organic Compounds | 6.50 | -- | µgC/g | VDA 277 |
Odor | 3 | -- | VDA 270 | |
备注: 3 10℃/min |
Rheological properties | dry / cond | Unit | Test Standard |
Moulding shrinkage,parallel | 0.3 / * | % | ISO 294-4,2577 |
Moulding shrinkage,normal | 0.8 / * | % | ISO 294-4,2577 |
Mechanical properties | dry / cond | Unit | Test Standard |
Tensile Modulus | 17000 / 13000 | MPa | ISO 527-1/-2 |
Stress at break | 250 / 190 | MPa | ISO 527-1/-2 |
Strain at break | 2.3 / 3.2 | % | ISO 527-1/-2 |
Tensile creep modulus,1h | * / 10000 | MPa | ISO 899-1 |
Tensile creep modulus,1000h | * / 8000 | MPa | ISO 899-1 |
Charpy impact strength,23℃ | 100 / 110 | kJ/m² | ISO 179/1eU |
Charpy impact strength,-30℃ | 90 / 90 | kJ/m² | ISO 179/1eU |
Charpy notched impact strength,23℃ | 18 / 20 | kJ/m² | ISO 179/1eA |
Charpy notched impact strength,-30℃ | 15 / 14 | kJ/m² | ISO 179/1eA |
Thermal properties | dry / cond | Unit | Test Standard |
Melting temperature,10℃/min | 262 / * | ℃ | ISO 11357-1/-3 |
Glass transition temperature,10℃/min | 80 / - | ℃ | ISO 11357-1/-2 |
Temp. of deflection under load,1.8 MPa | 260 / * | ℃ | ISO 75-1/-2 |
Temp. of deflection under load,0.45 MPa | 262 / * | ℃ | ISO 75-1/-2 |
Vicat softening temperature,50℃/h,50N | 255 / * | ℃ | ISO 306 |
Coeff. of linear therm. expansion,parallel | 15 / * | E-6/K | ISO 11359-1/-2 |
Coeff. of linear therm. expansion,normal | 75 / * | E-6/K | ISO 11359-1/-2 |
Flammability | dry / cond | Unit | Test Standard |
Burning Behav. at 1.5 mm nom. thickn. | HB / * | class | IEC 60695-11-10 |
Thickness tested | 1.5 / * | mm | IEC 60695-11-10 |
UL recognition | UL / * | - | - |
Burning Behav. at thickness h | HB / * | class | IEC 60695-11-10 |
Thickness tested | 0.8 / * | mm | IEC 60695-11-10 |
UL recognition | UL / * | - | - |
Oxygen index | 24 / * | % | ISO 4589-1/-2 |
Electrical properties | dry / cond | Unit | Test Standard |
Volume resistivity | 1E13 / - | Ohm*m | IEC 60093 |
Surface resistivity | * / 4E14 | Ohm | IEC 60093 |
Other properties | dry / cond | Unit | Test Standard |
Water absorption,2mm | 4.2 / * | % | Sim. to ISO 62 |
Humidity absorption,2mm | 1.2 / * | % | Sim. to ISO 62 |
Density | 1570 / - | kg/m³ | ISO 1183 |
Material specific properties | dry / cond | Unit | Test Standard |
Viscosity number | 100 / * | cm³/g | ISO 307,1157,1628 |
Rheological calc. properties | Value | Unit | Test Standard |
Density of melt | 1400 | kg/m³ | - |
Thermal conductivity of melt | 0.31 | W/(m K) | - |
Spec. heat capacity melt | 1870 | J/(kg K) | - |
Ejection temperature | 195 | ℃ | - |
Min. mould temperature | 70 | ℃ | - |
Max. mould temperature | 120 | ℃ | - |
Min. melt temperature | 285 | ℃ | - |
Max. melt temperature | 305 | ℃ | - |
VDA Properties | Value | Unit | Test Standard |
Burning rate,Thickness 1 mm | 0[1] | mm/min | ISO 3795(FMVSS 302) |
Emission of organic compounds | 6.5 | µgC/g | VDA 277 |
Odour | 3 | class | VDA 270 |
1:SE |
Chemical Media Resistance
Acids
√ Acetic Acid (5% by mass) (23℃)
√ Citric Acid solution (10% by mass) (23℃)
√ Lactic Acid (10% by mass) (23℃)
× Hydrochloric Acid (36% by mass) (23℃)
× Nitric Acid (40% by mass) (23℃)
× Sulfuric Acid (38% by mass) (23℃)
× Sulfuric Acid (5% by mass) (23℃)
× Chromic Acid solution (40% by mass) (23℃)
Bases
× Sodium Hydroxide solution (35% by mass) (23℃)
√ Sodium Hydroxide solution (1% by mass) (23℃)
√ Ammonium Hydroxide solution (10% by mass) (23℃)
Alcohols
√ Isopropyl alcohol (23℃)
√ Methanol (23℃)
√ Ethanol (23℃)
Hydrocarbons
√ n-Hexane (23℃)
√ Toluene (23℃)
√ iso-Octane (23℃)
Ketones
√ Acetone (23℃)
Ethers
√ Diethyl ether (23℃)
Mineral oils
√ SAE 10W40 multigrade motor oil (23℃)
√ SAE 10W40 multigrade motor oil (130℃)
√ SAE 80/90 hypoid-gear oil (130℃)
√ Insulating Oil (23℃)
Standard Fuels
√ ISO 1817 Liquid 1 (60℃)
√ ISO 1817 Liquid 2 (60℃)
√ ISO 1817 Liquid 3 (60℃)
√ ISO 1817 Liquid 4 (60℃)
√ Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23℃)
√ Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23℃)
√ Diesel fuel (pref. ISO 1817 Liquid F) (23℃)
√ Diesel fuel (pref. ISO 1817 Liquid F) (90℃)
√ Diesel fuel (pref. ISO 1817 Liquid F) (>90℃)
Salt solutions
√ Sodium Chloride solution (10% by mass) (23℃)
× Sodium Hypochlorite solution (10% by mass) (23℃)
√ Sodium Carbonate solution (20% by mass) (23℃)
√ Sodium Carbonate solution (2% by mass) (23℃)
× Zinc Chloride solution (50% by mass) (23℃)
Other
√ Ethyl Acetate (23℃)
× Hydrogen peroxide (23℃)
√ DOT No. 4 Brake fluid (130℃)
√ Ethylene Glycol (50% by mass) in water (108℃)
√ 1% nonylphenoxy-polyethyleneoxy ethanol in water (23℃)
√ 50% Oleic acid + 50% Olive Oil (23℃)
√ Water (23℃)
√ Water (90℃)
× Phenol solution (5% by mass) (23℃)
Symbols used:
√ possibly resistant
Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).
× not recommended - see explanation
Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).