进口塑胶料
注:请在右边的搜索栏查找产品

PBT CE15315 NC010 含15%玻纤增强,阻燃V0

添加时间:2013-11-23  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料

DuPont Crastin® PBT CE15315 NC010

Crastin® CE15315 NC010 | PBT-GF15 FR(17) THERMOPLASTIC POLYESTER RESIN
 
Regional Availability
Asia Pacific
 
Processing
Injection Moulding
 
Delivery form
Pellets
 
Product Text
Common features of Crastin® thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat ageing resistance.
 
The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste.
 
If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.
 
Crastin® CE15315 NC010 is a 15% glass reinforced flame retardant polybutylene terephthalate moulding resin. It is recognized as UL94 V-0 at 0.71mm (0.028in).
 
Injection molding
PREPROCESSING
Drying recommended = Yes
Drying temperature = 100-140℃
Drying time, dehumidified dryer = 2-6 h
Processing moisture content = <0.04 %
 
PROCESSING
Melt temperature optimum = 250℃
Melt temperature range = 240-260℃
Mould temperature optimum = 60℃
Mould temperature range = 10-110℃
 
PROPERTIES
Rheological properties Value Unit Test Standard
Moulding shrinkage,parallel 0.7 % ISO 294-4,2577
Moulding shrinkage,normal 1 % ISO 294-4,2577
Mechanical properties Value Unit Test Standard
Tensile Modulus 5960 MPa ISO 527-1/-2
Yield stress 101 MPa ISO 527-1/-2
Stress at break 100 MPa ISO 527-1/-2
Strain at break 3.1 % ISO 527-1/-2
Charpy impact strength,23℃ 31.8 kJ/m² ISO 179/1eU
Charpy impact strength,-30℃ 30.1 kJ/m² ISO 179/1eU
Charpy notched impact strength,23℃ 6.2 kJ/m² ISO 179/1eA
Charpy notched impact strength,-30℃ 6.2 kJ/m² ISO 179/1eA
Thermal properties Value Unit Test Standard
Melting temperature,10℃/min 223 ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa 200 ISO 75-1/-2
Flammability Value Unit Test Standard
Burning Behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10
Thickness tested 1.5 mm IEC 60695-11-10
UL recognition UL - -
Burning Behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 0.7 mm IEC 60695-11-10
Electrical properties Value Unit Test Standard
Comparative tracking index 200 - IEC 60112
Other properties Value Unit Test Standard
Density 1500 kg/m³ ISO 1183
Rheological calc. properties Value Unit Test Standard
Min. mould temperature 10 -
Min. melt temperature 240 -

 

Chemical Media Resistance

Acids

√ Acetic Acid (5% by mass) (23℃)

√ Citric Acid solution (10% by mass) (23℃)

√ Lactic Acid (10% by mass) (23℃)

× Hydrochloric Acid (36% by mass) (23℃)

× Nitric Acid (40% by mass) (23℃)

× Sulfuric Acid (38% by mass) (23℃)

× Sulfuric Acid (5% by mass) (23℃)

× Chromic Acid solution (40% by mass) (23℃)

Bases

× Sodium Hydroxide solution (35% by mass) (23℃)

√ Sodium Hydroxide solution (1% by mass) (23℃)

√ Ammonium Hydroxide solution (10% by mass) (23℃)

Alcohols

√ Isopropyl alcohol (23℃)

√ Methanol (23℃)

√ Ethanol (23℃)

Hydrocarbons

√ n-Hexane (23℃)

√ Toluene (23℃)

√ iso-Octane (23℃)

Ketones

√ Acetone (23℃)

Ethers

√ Diethyl ether (23℃)

Mineral oils

√ SAE 10W40 multigrade motor oil (23℃)

× SAE 10W40 multigrade motor oil (130℃)

× SAE 80/90 hypoid-gear oil (130℃)

√ Insulating Oil (23℃)

Standard Fuels

× ISO 1817 Liquid 1 (60℃)

× ISO 1817 Liquid 2 (60℃)

× ISO 1817 Liquid 3 (60℃)

× ISO 1817 Liquid 4 (60℃)

√ Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23℃)

√ Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (90℃)

× Diesel fuel (pref. ISO 1817 Liquid F) (>90℃)

Salt solutions

√ Sodium Chloride solution (10% by mass) (23℃)

√ Sodium Hypochlorite solution (10% by mass) (23℃)

√ Sodium Carbonate solution (20% by mass) (23℃)

√ Sodium Carbonate solution (2% by mass) (23℃)

√ Zinc Chloride solution (50% by mass) (23℃)

Other

√ Ethyl Acetate (23℃)

× Hydrogen peroxide (23℃)

× DOT No. 4 Brake fluid (130℃)

× Ethylene Glycol (50% by mass) in water (108℃)

√ 1% nonylphenoxy-polyethyleneoxy ethanol in water (23℃)

√ 50% Oleic acid + 50% Olive Oil (23℃)

√ Water (23℃)

× Water (90℃)

√ Phenol solution (5% by mass) (23℃)

 

Symbols used:

√ possibly resistant

Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).

 

× not recommended - see explanation

Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).

联系我们
相关材料