产品分类

PRODUCT CATEGORY

产品搜索

PRODUCT SEARCH

联络方式

分享到：

注：请在右边的搜索栏查找产品

PBT FGS600F10 NC010 高粘度,润滑级,食品级

添加时间：2013-11-24 信息来源：http://www.xzslw.com/ 作者：苏州希普能塑料

DuPont Crastin® PBT FGS600F10 NC010

Crastin® FGS600F10 NC010 | PBT THERMOPLASTIC POLYESTER RESIN

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa, Global

Processing

Injection Moulding, Profile Extrusion, Other Extrusion, Coatable

Delivery form

Pellets

Additives

Release agent

Product Text

Crastin® FGS600F10 NC010 is an unreinforced lubricated, high viscosity polybutylene terephthalate resin for extrusion and injection molding. It has been developed for consideration into applications such as parts for the food industry.

FOOD CONTACT

This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. For details, individual compliance statements are available from your DuPont representative.

Injection molding

PREPROCESSING

Drying recommended = Yes

Drying temperature = 110-130℃

Drying time, dehumidified dryer = 2-4 h

Processing moisture content = <0.04 %

PROCESSING

Melt temperature optimum = 250℃

Melt temperature range = 240-260℃

Mould temperature optimum = 80℃

Mould temperature range = 30-130℃

Profile extrusion

PREPROCESSING

Drying recommended = Yes

Drying temperature = 110-130℃

Drying time, dehumidified dryer = 2-4 h

Processing moisture content = <0.04 %

PROCESSING

Melt temperature optimum = 250℃

Melt temperature range = 240-260℃

PROPERTIES

Rheological properties	Value	Unit	Test Standard
Melt mass-flow rate	10.1	g/10min	ISO 1133
Temperature	250	℃	ISO 1133
Load	2.16	kg	ISO 1133
Moulding shrinkage,parallel	1.7	%	ISO 294-4,2577
Moulding shrinkage,normal	1.6	%	ISO 294-4,2577
Mechanical properties	Value	Unit	Test Standard
Tensile Modulus	2600	MPa	ISO 527-1/-2
Yield stress	57	MPa	ISO 527-1/-2
Yield strain	6	%	ISO 527-1/-2
Nominal strain at break	>50	%	ISO 527-1/-2
Tensile creep modulus,1h	2600	MPa	ISO 899-1
Tensile creep modulus,1000h	1800	MPa	ISO 899-1
Charpy impact strength,23℃	N	kJ/m²	ISO 179/1eU
Charpy impact strength,-30℃	N	kJ/m²	ISO 179/1eU
Charpy notched impact strength,23℃	5	kJ/m²	ISO 179/1eA
Charpy notched impact strength,-30℃	4	kJ/m²	ISO 179/1eA
Thermal properties	Value	Unit	Test Standard
Melting temperature,10℃/min	225	℃	ISO 11357-1/-3
Glass transition temperature,10℃/min	55	℃	ISO 11357-1/-2
Temp. of deflection under load,1.8 MPa	50	℃	ISO 75-1/-2
Temp. of deflection under load,0.45 MPa	115	℃	ISO 75-1/-2
Vicat softening temperature,50℃/h,50N	175	℃	ISO 306
Coeff. of linear therm. expansion,parallel	110	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion,normal	120	E-6/K	ISO 11359-1/-2
Other properties	Value	Unit	Test Standard
Water absorption,2mm	0.5	%	Sim. to ISO 62
Humidity absorption,2mm	0.2	%	Sim. to ISO 62
Density	1300	kg/m³	ISO 1183
Rheological calc. properties	Value	Unit	Test Standard
Density of melt	1110	kg/m³	-
Thermal conductivity of melt	0.21	W/(m K)	-
Spec. heat capacity melt	2100	J/(kg K)	-
Min. mould temperature	30	℃	-
Max. mould temperature	130	℃	-
Min. melt temperature	240	℃	-
Max. melt temperature	260	℃	-

Chemical Media Resistance

Acids

√ Acetic Acid (5% by mass) (23℃)

√ Citric Acid solution (10% by mass) (23℃)

√ Lactic Acid (10% by mass) (23℃)

× Hydrochloric Acid (36% by mass) (23℃)

× Nitric Acid (40% by mass) (23℃)

× Sulfuric Acid (38% by mass) (23℃)

× Sulfuric Acid (5% by mass) (23℃)

× Chromic Acid solution (40% by mass) (23℃)

Bases

× Sodium Hydroxide solution (35% by mass) (23℃)

√ Sodium Hydroxide solution (1% by mass) (23℃)

√ Ammonium Hydroxide solution (10% by mass) (23℃)

Alcohols

√ Isopropyl alcohol (23℃)

√ Methanol (23℃)

√ Ethanol (23℃)

Hydrocarbons

√ n-Hexane (23℃)

√ Toluene (23℃)

√ iso-Octane (23℃)

Ketones

√ Acetone (23℃)

Ethers

√ Diethyl ether (23℃)

Mineral oils

√ SAE 10W40 multigrade motor oil (23℃)

× SAE 10W40 multigrade motor oil (130℃)

× SAE 80/90 hypoid-gear oil (130℃)

√ Insulating Oil (23℃)

Standard Fuels

× ISO 1817 Liquid 1 (60℃)

× ISO 1817 Liquid 2 (60℃)

× ISO 1817 Liquid 3 (60℃)

× ISO 1817 Liquid 4 (60℃)

√ Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23℃)

√ Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (90℃)

× Diesel fuel (pref. ISO 1817 Liquid F) (>90℃)

Salt solutions

√ Sodium Chloride solution (10% by mass) (23℃)

√ Sodium Hypochlorite solution (10% by mass) (23℃)

√ Sodium Carbonate solution (20% by mass) (23℃)

√ Sodium Carbonate solution (2% by mass) (23℃)

√ Zinc Chloride solution (50% by mass) (23℃)

Other

√ Ethyl Acetate (23℃)

× Hydrogen peroxide (23℃)

× DOT No. 4 Brake fluid (130℃)

× Ethylene Glycol (50% by mass) in water (108℃)

√ 1% nonylphenoxy-polyethyleneoxy ethanol in water (23℃)

√ 50% Oleic acid + 50% Olive Oil (23℃)

√ Water (23℃)

× Water (90℃)

√ Phenol solution (5% by mass) (23℃)

Symbols used:

√ possibly resistant

Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).

× not recommended - see explanation

Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).