进口塑胶料
注:请在右边的搜索栏查找产品

PBT HR5330HFS NC010 含30%玻纤,抗水解

添加时间:2013-11-24  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料
Crastin
Crastin® HR5330HFS NC010
30%玻璃纤维增强材料
THERMOPLASTIC POLYESTER RESIN
DuPont Performance Polymers
 
产品说明:
30% Glass Reinforced Polybutylene Terephthalate with Improved Processing
 
含添加剂:脱模剂
填料增强:含30%玻璃纤维增强
加工方法:注射成型
代理销售:苏州希普能工程塑料 185 5121 3137 谭经理
塑料牌号:PBT HR5330HFS NC010
 
产品物性:
物理性能 额定值 单位制 测试方法
密度 1.50 g/cm3 ISO 1183
溶化体积流率(MVR)(250℃/2.16 kg) 7.50 cm3/10min ISO 1133
收缩率 ISO 294-4
垂直流动方向 1.0 %
流动方向 0.30 %
吸水率 ISO 62
23℃,24 hr,2.00 mm 0.35 %
平衡,23℃,2.00 mm,50% RH 0.15 %
机械性能 额定值 单位制 测试方法
拉伸模量 8500 MPa ISO 527-2
拉伸应力(断裂) 130 MPa ISO 527-2
拉伸应变(断裂) 3.1 % ISO 527-2
弯曲应力 195 MPa ISO 178
冲击性能 额定值 单位制 测试方法
简支梁缺口冲击强度 ISO 179/1eA
-40℃ 10 kJ/m2
23℃ 13 kJ/m2
简支梁无缺口冲击强度(23℃) 70 kJ/m2 ISO 179/1eU
热性能 额定值 单位制 测试方法
热变形温度
0.45 MPa,未退火 222 ISO 75-2/B
1.8 MPa,未退火 207 ISO 75-2/A
玻璃转化温度2 65.0 ISO 11357-2
熔融温度2 225 ISO 11357-3
电气性能 额定值 单位制 测试方法
表面电阻率 > 1.0E+15 ohms IEC 60093
体积电阻率 > 1.0E+15 ohms·cm IEC 60093
介电强度 34 kV/mm IEC 60243-1
漏电起痕指数 575 V IEC 60112
可燃性 额定值 单位制 测试方法
燃烧速率(1.00 mm) 30 mm/min ISO 3795
可燃性等级(1.50 mm) HB IEC 60695-11-10,-20
极限氧指数 20 % ISO 4589-2
充模分析 额定值 单位制 测试方法
熔体粘度(250℃,1000 sec^-1) 230 Pa·s ISO 11443
备注:
2 10℃/min
 
英文资料
Crastin® HR5330HFS NC010 | PBT-I-GF30 THERMOPLASTIC POLYESTER RESIN
 
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa, Global
 
Processing
Injection Moulding
 
Delivery form
Pellets
 
Additives
Release agent
 
Product Text
Common features of Crastin® thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat ageing resistance.
 
The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste.
If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.
 
Crastin® HR5330HFS is a 30% glass reinforced PBT with high flow, moderately toughened, hydrolysis resistant (HR) polybutylene terephtalate for injection molding.
 
Injection molding
PREPROCESSING
Drying recommended = Yes
Drying temperature = 110-130℃
Drying time, dehumidified dryer = 2-4 h
Processing moisture content = <0.04 %
 
PROCESSING
Melt temperature optimum = 250℃
Melt temperature range = 240-260℃
Mold temperature optimum = 80℃
Mold temperature range = 30-130℃
 
PROPERTIES
Rheological properties Value Unit Test Standard
Moulding shrinkage,parallel 0.3 % ISO 294-4,2577
Moulding shrinkage,normal 1 % ISO 294-4,2577
Mechanical properties Value Unit Test Standard
Tensile Modulus 8400 MPa ISO 527-1/-2
Stress at break 130 MPa ISO 527-1/-2
Strain at break 3.1 % ISO 527-1/-2
Charpy impact strength,23℃ 70 kJ/m² ISO 179/1eU
Charpy notched impact strength,23℃ 13 kJ/m² ISO 179/1eA
Thermal properties Value Unit Test Standard
Melting temperature,10℃/min 225 ISO 11357-1/-3
Glass transition temperature,10℃/min 65 ISO 11357-1/-2
Temp. of deflection under load,1.8 MPa 207 ISO 75-1/-2
Temp. of deflection under load,0.45 MPa 222 ISO 75-1/-2
Flammability Value Unit Test Standard
Burning Behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.5 mm IEC 60695-11-10
Oxygen index 20 % ISO 4589-1/-2
Electrical properties Value Unit Test Standard
Volume resistivity >1E13 Ohm*m IEC 60093
Comparative tracking index 600 - IEC 60112
Other properties Value Unit Test Standard
Water absorption,2mm 0.35 % Sim. to ISO 62
Humidity absorption,2mm 0.15 % Sim. to ISO 62
Density 1500 kg/m³ ISO 1183
Rheological calc. properties Value Unit Test Standard
Min. mould temperature 30 -
Max. mould temperature 140 -
Min. melt temperature 240 -
Max. melt temperature 260 -
VDA Properties Value Unit Test Standard
Burning rate,Thickness 1 mm 30 mm/min ISO 3795 (FMVSS 302)

 

Chemical Media Resistance

Acids

√ Acetic Acid (5% by mass) (23℃)

√ Citric Acid solution (10% by mass) (23℃)

√ Lactic Acid (10% by mass) (23℃)

× Hydrochloric Acid (36% by mass) (23℃)

× Nitric Acid (40% by mass) (23℃)

× Sulfuric Acid (38% by mass) (23℃)

× Sulfuric Acid (5% by mass) (23℃)

× Chromic Acid solution (40% by mass) (23℃)

Bases

× Sodium Hydroxide solution (35% by mass) (23℃)

√ Sodium Hydroxide solution (1% by mass) (23℃)

√ Ammonium Hydroxide solution (10% by mass) (23℃)

Alcohols

√ Isopropyl alcohol (23℃)

√ Methanol (23℃)

√ Ethanol (23℃)

Hydrocarbons

√ n-Hexane (23℃)

√ Toluene (23℃)

√ iso-Octane (23℃)

Ketones

√ Acetone (23℃)

Ethers

√ Diethyl ether (23℃)

Mineral oils

√ SAE 10W40 multigrade motor oil (23℃)

× SAE 10W40 multigrade motor oil (130℃)

× SAE 80/90 hypoid-gear oil (130℃)

√ Insulating Oil (23℃)

Standard Fuels

× ISO 1817 Liquid 1 (60℃)

× ISO 1817 Liquid 2 (60℃)

× ISO 1817 Liquid 3 (60℃)

× ISO 1817 Liquid 4 (60℃)

√ Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23℃)

√ Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (90℃)

× Diesel fuel (pref. ISO 1817 Liquid F) (>90℃)

Salt solutions

√ Sodium Chloride solution (10% by mass) (23℃)

√ Sodium Hypochlorite solution (10% by mass) (23℃)

√ Sodium Carbonate solution (20% by mass) (23℃)

√ Sodium Carbonate solution (2% by mass) (23℃)

√ Zinc Chloride solution (50% by mass) (23℃)

Other

√ Ethyl Acetate (23℃)

× Hydrogen peroxide (23℃)

× DOT No. 4 Brake fluid (130℃)

× Ethylene Glycol (50% by mass) in water (108℃)

√ 1% nonylphenoxy-polyethyleneoxy ethanol in water (23℃)

√ 50% Oleic acid + 50% Olive Oil (23℃)

√ Water (23℃)

× Water (90℃)

√ Phenol solution (5% by mass) (23℃)

 

Symbols used:

√ possibly resistant

Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).

 

× not recommended - see explanation

Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).

联系湘樟塑料
相关材料