进口塑胶料
注:请在右边的搜索栏查找产品

PBT SK695FR NC010 含30%玻璃纤维增强,阻燃级

添加时间:2013-11-25  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料
Crastin
Crastin® SK695FR NC010
30%玻璃纤维增强材料
THERMOPLASTIC POLYESTER RESIN
DuPont Performance Polymers
 
产品说明:
Crastin® SK695FR is a 30% glass reinforced, flame retardant polybutylene terephtalate for injection moulding.
 
黄卡下载:E41938-100191678
填料增强:含30%玻璃纤维增强
材料特性:阻燃级
外观颜色:自然色
部件标识:>PBT-GF30FR(17)<
加工方法:注射成型
代理销售:苏州希普能工程塑料 185 5121 3137 谭经理
塑料牌号:PBT SK695FR NC010
版权所有:http://www.xzslw.com/sujiao/pbt/crastin/sk695frnc010.html
 
产品物性:
物理性能 额定值 单位制 测试方法
密度 1.67 g/cm³ ISO 1183
收缩率     ISO 294-4
垂直流动方向 1.1 %
流动方向 0.30 %
机械性能 额定值 单位制 测试方法
拉伸模量 11600 MPa ISO 527-2
拉伸应力(断裂) 154 MPa ISO 527-2
拉伸应变(断裂) 2.2 % ISO 527-2
冲击性能 额定值 单位制 测试方法
简支梁缺口冲击强度(23℃) 9.9 kJ/m² ISO 179/1eA
简支梁无缺口冲击强度(23℃) 57 kJ/m² ISO 179/1eU
热性能 额定值 单位制 测试方法
热变形温度(1.8 MPa,未退火) 210 ISO 75-2/A
熔融温度2 222 ISO 11357-3
电气性能 额定值 单位制 测试方法
表面电阻率 > 1.0E+15 ohm IEC 60093
体积电阻率 > 1.0E+15 ohm·cm IEC 60093
相比耐漏电起痕指数(CTI)(0.750 mm) PLC 3   UL 746
漏电起痕指数 200 V IEC 60112
可燃性 额定值 单位制 测试方法
可燃性等级     IEC 60695-11-10,-20
0.800 mm V-0  
1.50 mm V-0  
充模分析 额定值 单位制  
熔体密度 1.46 g/cm³  
备注:
2 10℃/min
 
英文版资料:
Crastin® SK695FR NC010 | PBT-GF30 FR(17) THERMOPLASTIC POLYESTER RESIN
 
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa, Global
 
Processing
Injection Moulding
 
Product Text
Common features of Crastin® thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat ageing resistance.
 
The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.
 
Crastin® SK695FR is a 30% glass reinforced, flame retardant polybutylene terephtalate for injection moulding.
 
Injection molding
PREPROCESSING
Drying recommended = Yes
Drying temperature = 110-130℃
Drying time, dehumidified dryer = 2-4 h
Processing moisture content = <0.04 %
 
PROCESSING
Melt temperature optimum = 250℃
Melt temperature range = 240-260℃
Mould temperature optimum = 80℃
Mould temperature range = 30-130℃
 
PROPERTIES
Rheological properties Value Unit Test Standard
Moulding shrinkage,parallel 0.3 % ISO 294-4,2577
Moulding shrinkage,normal 1.1 % ISO 294-4,2577
Mechanical properties Value Unit Test Standard
Tensile Modulus 11000 MPa ISO 527-1/-2
Stress at break 150 MPa ISO 527-1/-2
Strain at break 2.1 % ISO 527-1/-2
Charpy impact strength,23℃ 50 kJ/m² ISO 179/1eU
Charpy notched impact strength,23℃ 10 kJ/m² ISO 179/1eA
Thermal properties Value Unit Test Standard
Melting temperature,10℃/min 221 ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa 212 ISO 75-1/-2
Flammability Value Unit Test Standard
Burning Behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10
Thickness tested 1.5 mm IEC 60695-11-10
Burning Behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 0.8 mm IEC 60695-11-10
Electrical properties Value Unit Test Standard
Comparative tracking index 175 - IEC 60112
Other properties Value Unit Test Standard
Density 1660 kg/m³ ISO 1183
Rheological calc. properties Value Unit Test Standard
Density of melt 1460 kg/m³ -
Thermal conductivity of melt 0.29 W/(m K) -
Spec. heat capacity melt 1430 J/(kg K) -
Ejection temperature 165 -
Min. mould temperature 30 -
Max. mould temperature 130 -
Min. melt temperature 240 -
Max. melt temperature 260 -

 

Chemical Media Resistance

Acids

√ Acetic Acid (5% by mass) (23℃)

√ Citric Acid solution (10% by mass) (23℃)

√ Lactic Acid (10% by mass) (23℃)

× Hydrochloric Acid (36% by mass) (23℃)

× Nitric Acid (40% by mass) (23℃)

× Sulfuric Acid (38% by mass) (23℃)

× Sulfuric Acid (5% by mass) (23℃)

× Chromic Acid solution (40% by mass) (23℃)

Bases

× Sodium Hydroxide solution (35% by mass) (23℃)

√ Sodium Hydroxide solution (1% by mass) (23℃)

√ Ammonium Hydroxide solution (10% by mass) (23℃)

Alcohols

√ Isopropyl alcohol (23℃)

√ Methanol (23℃)

√ Ethanol (23℃)

Hydrocarbons

√ n-Hexane (23℃)

√ Toluene (23℃)

√ iso-Octane (23℃)

Ketones

√ Acetone (23℃)

Ethers

√ Diethyl ether (23℃)

Mineral oils

√ SAE 10W40 multigrade motor oil (23℃)

× SAE 10W40 multigrade motor oil (130℃)

× SAE 80/90 hypoid-gear oil (130℃)

√ Insulating Oil (23℃)

Standard Fuels

× ISO 1817 Liquid 1 (60℃)

× ISO 1817 Liquid 2 (60℃)

× ISO 1817 Liquid 3 (60℃)

× ISO 1817 Liquid 4 (60℃)

√ Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23℃)

√ Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (90℃)

× Diesel fuel (pref. ISO 1817 Liquid F) (>90℃)

Salt solutions

√ Sodium Chloride solution (10% by mass) (23℃)

√ Sodium Hypochlorite solution (10% by mass) (23℃)

√ Sodium Carbonate solution (20% by mass) (23℃)

√ Sodium Carbonate solution (2% by mass) (23℃)

√ Zinc Chloride solution (50% by mass) (23℃)

Other

√ Ethyl Acetate (23℃)

× Hydrogen peroxide (23℃)

× DOT No. 4 Brake fluid (130℃)

× Ethylene Glycol (50% by mass) in water (108℃)

√ 1% nonylphenoxy-polyethyleneoxy ethanol in water (23℃)

√ 50% Oleic acid + 50% Olive Oil (23℃)

√ Water (23℃)

× Water (90℃)

√ Phenol solution (5% by mass) (23℃)

 

Symbols used:

√ possibly resistant

Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).

 

× not recommended - see explanation

Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).

联系湘樟塑料