产品分类

PRODUCT CATEGORY

产品搜索

PRODUCT SEARCH

联络方式

分享到：

注：请在右边的搜索栏查找产品

PBT ST830FRUV NC010 超韧级,阻燃级,光稳定级

添加时间：2013-11-25 信息来源：http://www.xzslw.com/ 作者：苏州希普能塑料

DuPont Crastin® PBT ST830FRUV NC010

Crastin® ST830FRUV NC010 | PBT-I FR(17) THERMOPLASTIC POLYESTER RESIN

Regional Availability

North America, South and Central America

Processing

Injection Moulding

Special characteristics

Light stabilised or stable to light, U.V. stabilised or stable to weather

Product Text

ISO 1043: PBT-HIFR(17)

Common features of Crastin® thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat ageing resistance.

The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste.

If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.

Crastin® ST830FRUV NC010 is an unreinforced, Super Tough, flame retardant polybutylene terephthalate resin for injection moulding. It contains a UV light stabilizer and is recognized as UL94V-0 at 0.85mm (0.033in).

Injection molding

PREPROCESSING

Drying recommended = Yes

Drying temperature = 110-130℃

Drying time, dehumidified dryer = 2-4 h

Processing moisture content = <0.04 %

PROCESSING

Melt temperature optimum = 250℃

Melt temperature range = 240-260℃

Mould temperature optimum = 80℃

Mould temperature range = 30-130℃

PROPERTIES

Rheological properties	Value	Unit	Test Standard
Moulding shrinkage,parallel	2	%	ISO 294-4,2577
Moulding shrinkage,normal	1.6	%	ISO 294-4,2577
Mechanical properties	Value	Unit	Test Standard
Tensile Modulus	2200	MPa	ISO 527-1/-2
Yield stress	40	MPa	ISO 527-1/-2
Yield strain	9	%	ISO 527-1/-2
Nominal strain at break	45	%	ISO 527-1/-2
Charpy impact strength,23℃	N	kJ/m²	ISO 179/1eU
Charpy impact strength,-30℃	350	kJ/m²	ISO 179/1eU
Charpy impact strength,-40℃	350	kJ/m²	ISO 179/1eU
Charpy notched impact strength,23℃	65	kJ/m²	ISO 179/1eA
Charpy notched impact strength,-30℃	10	kJ/m²	ISO 179/1eA
Charpy notched impact strength,-40℃	10	kJ/m²	ISO 179/1eA
Thermal properties	Value	Unit	Test Standard
Melting temperature,10℃/min	225	℃	ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa	55	℃	ISO 75-1/-2
Temp. of deflection under load,0.45 MPa	125	℃	ISO 75-1/-2
Coeff. of linear therm. expansion,parallel	190	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion,normal	190	E-6/K	ISO 11359-1/-2
Flammability	Value	Unit	Test Standard
Burning Behav. at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
Thickness tested	1.5	mm	IEC 60695-11-10
UL recognition	UL	-	-
Burning Behav. at thickness h	V-0	class	IEC 60695-11-10
Thickness tested	0.8	mm	IEC 60695-11-10
Electrical properties	Value	Unit	Test Standard
Comparative tracking index	600	-	IEC 60112
Other properties	Value	Unit	Test Standard
Density	1370	kg/m³	ISO 1183
Rheological calc. properties	Value	Unit	Test Standard
Density of melt	1170	kg/m³	-

Chemical Media Resistance

Acids

√ Acetic Acid (5% by mass) (23℃)

√ Citric Acid solution (10% by mass) (23℃)

√ Lactic Acid (10% by mass) (23℃)

× Hydrochloric Acid (36% by mass) (23℃)

× Nitric Acid (40% by mass) (23℃)

× Sulfuric Acid (38% by mass) (23℃)

× Sulfuric Acid (5% by mass) (23℃)

× Chromic Acid solution (40% by mass) (23℃)

Bases

× Sodium Hydroxide solution (35% by mass) (23℃)

√ Sodium Hydroxide solution (1% by mass) (23℃)

√ Ammonium Hydroxide solution (10% by mass) (23℃)

Alcohols

√ Isopropyl alcohol (23℃)

√ Methanol (23℃)

√ Ethanol (23℃)

Hydrocarbons

√ n-Hexane (23℃)

√ Toluene (23℃)

√ iso-Octane (23℃)

Ketones

√ Acetone (23℃)

Ethers

√ Diethyl ether (23℃)

Mineral oils

√ SAE 10W40 multigrade motor oil (23℃)

× SAE 10W40 multigrade motor oil (130℃)

× SAE 80/90 hypoid-gear oil (130℃)

√ Insulating Oil (23℃)

Standard Fuels

× ISO 1817 Liquid 1 (60℃)

× ISO 1817 Liquid 2 (60℃)

× ISO 1817 Liquid 3 (60℃)

× ISO 1817 Liquid 4 (60℃)

√ Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23℃)

√ Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (90℃)

× Diesel fuel (pref. ISO 1817 Liquid F) (>90℃)

Salt solutions

√ Sodium Chloride solution (10% by mass) (23℃)

√ Sodium Hypochlorite solution (10% by mass) (23℃)

√ Sodium Carbonate solution (20% by mass) (23℃)

√ Sodium Carbonate solution (2% by mass) (23℃)

√ Zinc Chloride solution (50% by mass) (23℃)

Other

√ Ethyl Acetate (23℃)

× Hydrogen peroxide (23℃)

× DOT No. 4 Brake fluid (130℃)

× Ethylene Glycol (50% by mass) in water (108℃)

√ 1% nonylphenoxy-polyethyleneoxy ethanol in water (23℃)

√ 50% Oleic acid + 50% Olive Oil (23℃)

√ Water (23℃)

× Water (90℃)

√ Phenol solution (5% by mass) (23℃)

Symbols used:

√ possibly resistant

Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).

× not recommended - see explanation

Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).