进口塑胶料
注:请在右边的搜索栏查找产品

PBT 337 Resin 抗低温冲击

添加时间:2014-06-13  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料
VALOX PBT 337 Resin
VALOX™ PBT 337 Resin
非增强型
聚对苯二甲酸丁酯
SABIC Innovative Plastics (Americas)
 
产品说明
Low temperature impact PBT. Automotive applications: underhood power distribution boxes and covers.
 
材料特点:抗低温冲击的PBT
材料用途:汽车领域的应用:发动机罩下的配电箱和盖
定属记号:PBT
塑料牌号:PBT 337
销售电话:185 5121 3137 谭经理
销售地址:http://www.xzslw.com/sujiao/pbt/valox/337.html
 
材料物性
MECHANICAL Value Unit Standard
Tensile Stress,yld,Type I,50 mm/min 400 kgf/cm² ASTM D 638
Tensile Strain,yld,Type I,50 mm/min 3.9 % ASTM D 638
Flexural Stress,yld,1.3 mm/min,50 mm span 570 kgf/cm² ASTM D 790
Flexural Modulus,1.3 mm/min,50 mm span 18200 kgf/cm² ASTM D 790
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 326 cm-kgf/cm ASTM D 4812
Izod Impact,unnotched,-30℃ 326 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 88 cm-kgf/cm ASTM D 256
Izod Impact,notched,-30℃ 81 cm-kgf/cm ASTM D 256
THERMAL Value Unit Standard
HDT,0.45 MPa,6.4 mm,unannealed 98 ASTM D 648
HDT,1.82 MPa,6.4 mm,unannealed 47 ASTM D 648
PHYSICAL Value Unit Standard
Specific Gravity 1.22 - ASTM D 792
Water Absorption,24 hours 0.1 % ASTM D 570
Mold Shrinkage,flow,3.2 mm(5) 2.4-2.7 % SABIC Method
Mold Shrinkage,xflow,3.2 mm(5) 2.4-2.7 % SABIC Method
Melt Flow Rate,250℃/5.0 kgf 12.7 g/10 min ASTM D 1238
Melt Viscosity 12500 poise SABIC Method
Injection Molding Value Unit
Drying Temperature 120
Drying Time 3-4 hrs
Drying Time(Cumulative) 12 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 245-260
Nozzle Temperature 240-255
Front-Zone 3 Temperature 245-260
Middle-Zone 2 Temperature 240-255
Rear-Zone 1 Temperature 230-250
Mold Temperature 50-75
Back Pressure 0.3-0.7 MPa
Screw Speed 50-100 rpm
Shot to Cylinder Size 40-80 %
Vent Depth 0.013-0.025 mm
PBT VALOX™ RESIN
Semi-crystalline polybutylene terephthalate, one of the most widely-used engineering materials, shows low moisture and thermal expansion and offers outstanding wear and friction properties. With good strength at high temperatures, it has good electrical properties and flame resistance.
联系湘樟塑料
相关材料