进口塑胶料
注:请在右边的搜索栏查找产品

PBT VX3101N Resin 高流动,抗水解稳定

添加时间:2014-05-21  信息来源:http://www.xzslw.com/  作者:苏州希普能塑料
VALOX PBT VX3101N Resin
VALOX™ PBT VX3101N Resin
未增强
聚对苯二甲酸丁酯
SABIC Innovative Plastics (Europe-Africa-Middle East)
 
产品说明
VALOX VX3101N is an unreinforced PBT injection moulding resin, with excellent flow properties, good hydrolitical stability and chemical resistance.
 
材料特点:高流动,抗水解稳定,抗化学良好
定属记号:PBT
塑料牌号:PBT VX3101N
加工方法:注塑
销售电话:185 5121 3137 谭经理
销售地址:http://www.xzslw.com/sujiao/pbt/valox/vx3101n.html
 
材料物性
MECHANICAL Value Unit Standard
Taber Abrasion,CS-17,1 kg 9 mg/1000cy SABIC Method
Tensile Stress,yield,50 mm/min 65 MPa ISO 527
Tensile Stress,break,50 mm/min 50 MPa ISO 527
Tensile Strain,yield,50 mm/min 3.5 % ISO 527
Tensile Strain,break,50 mm/min 15 % ISO 527
Tensile Modulus,1 mm/min 2800 MPa ISO 527
Flexural Stress,yield,2 mm/min 85 MPa ISO 178
Flexural Modulus,2 mm/min 2600 MPa ISO 178
Hardness,H358/30 100 MPa ISO 2039-1
IMPACT Value Unit Standard
Izod Impact,unnotched 80*10*4 +23℃ NB kJ/m² ISO 180/1U
Izod Impact,unnotched 80*10*4 -30℃ NB kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 4 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 0℃ 2 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 -30℃ 2 kJ/m² ISO 180/1A
Charpy 23℃,V-notch Edgew 80*10*4 sp=62mm 5 kJ/m² ISO 179/1eA
Charpy -30℃,V-notch Edgew 80*10*4 sp=62mm 3 kJ/m² ISO 179/1eA
Charpy 23℃,Unnotch Edgew 80*10*4 sp=62mm NB kJ/m² ISO 179/1eU
Charpy -30℃,Unnotch Edgew 80*10*4 sp=62mm NB kJ/m² ISO 179/1eU
THERMAL Value Unit Standard
CTE,23℃ to 60℃,flow 1.3E-04 1/℃ ISO 11359-2
CTE,23℃ to 60℃,xflow 1.3E-04 1/℃ ISO 11359-2
Ball Pressure Test,125℃ +/- 2℃ PASSES - IEC 60695-10-2
Vicat Softening Temp,Rate B/50 183 ISO 306
Vicat Softening Temp,Rate B/120 185 ISO 306
HDT/Be,0.45MPa Edgew 120*10*4 sp=100mm 175 ISO 75/Be
HDT/Ae,1.8 MPa Edgew 120*10*4 sp=100mm 60 ISO 75/Ae
PHYSICAL Value Unit Standard
Mold Shrinkage on Tensile Bar,flow(2)(5) 1.1-1.8 % SABIC Method
Mold Shrinkage on Tensile Bar,xflow(2)(5) 0.9-1.8 % SABIC Method
Density 1.31 g/cm³ ISO 1183
Water Absorption,(23℃/sat) 0.34 % ISO 62
Moisture Absorption(23℃/50% RH) 0.08 % ISO 62
Melt Volume Rate,MVR at 250℃/1.2 kg 20 cm³/10 min ISO 1133
ELECTRICAL Value Unit Standard
Volume Resistivity >1.E+15 Ohm-cm IEC 60093
Surface Resistivity,ROA >1.E+15 Ohm IEC 60093
Dielectric Strength,in oil,3.2 mm 16 kV/mm IEC 60243-1
Relative Permittivity,1 MHz 2.9 - IEC 60250
Dissipation Factor,50/60 Hz 0.002 - IEC 60250
Dissipation Factor,1 MHz 0.02 - IEC 60250
Comparative Tracking Index 600 V IEC 60112
Relative Permittivity,50/60 Hz 3.1 - IEC 60250
FLAME CHARACTERISTICS Value Unit Standard
UL Compliant,94HB Flame Class Rating(3)(4) 1.5 mm UL 94 by SABIC-IP
Glow Wire Flammability Index 850℃,passes at 1 mm IEC 60695-2-12
Oxygen Index(LOI) 20 % ISO 4589
Injection Molding Value Unit
Drying Temperature 110-120
Drying Time 2-4 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 250-270
Nozzle Temperature 240-260
Front-Zone 3 Temperature 245-265
Middle-Zone 2 Temperature 240-255
Rear-Zone 1 Temperature 230-245
Hopper Temperature 40-60
Mold Temperature 40-100
PBT VALOX™ RESIN
Semi-crystalline polybutylene terephthalate, one of the most widely-used engineering materials, shows low moisture and thermal expansion and offers outstanding wear and friction properties. With good strength at high temperatures, it has good electrical properties and flame resistance.
联系湘樟塑料