产品分类
PRODUCT CATEGORY产品搜索
PRODUCT SEARCH
注:请在右边的搜索栏查找产品
TPU S 60 A 12 P 含非邻苯二甲酸酯增塑剂,耐磨损
添加时间:2013-12-31 信息来源:http://www.xzslw.com/ 作者:苏州希普能塑料
Elastollan® TPU S 60 A 12 P
热塑性聚氨酯弹性体(聚酯)
BASF Polyurethanes GmbH
产品说明
Thermoplastic Polyester-Polyurethane with excellent mechanical properties and wear resistance, good damping characteristics and a high resilience performance, plasticized, phthalate-free, transparent.
Processable by injection moulding.
含添加剂:增塑剂
材料特点:非邻苯二甲酸酯增塑剂,耐磨损,有弹性
材料外观:清晰/透明
材料形式:颗粒料
加工方法:注射成型
塑料牌号:TPU S 60 A 12 P
定属记号:TPU-聚脂
销售电话:185 5121 3137 谭经理
湘樟版权:http://www.xzslw.com/sujiao/tpu/elastollan/s60a12p.html
胶料物性
物理性能 | 额定值 | 单位制 | 测试方法 |
密度 | 1.19 | g/cm³ | ISO 1183/A |
硬度 | 额定值 | 单位制 | 测试方法 |
支撐硬度(邵氏 A) | 63 | ISO 7619 | |
机械性能 | 额定值 | 单位制 | 测试方法 |
磨损量 | 35.0 | mm³ | ISO 4649-A |
弹性体 | 额定值 | 单位制 | 测试方法 |
拉伸应力 | ISO 37 | ||
20%应变 | 1.00 | MPa | |
100%应变 | 3.00 | MPa | |
300%应变 | 6.50 | MPa | |
拉伸应力(屈服) | 35.0 | MPa | ISO 37 |
伸长率(断裂) | 750 | % | ISO 37 |
撕裂强度2 | 45 | kN/m | ISO 34-1 |
补充信息 Test plaques are manufactured by injection moulding from pre-dried granules (water content of <0,02%). Test plaques are aged 20 hrs at 100℃. Specimens are cut from test plaques. Test conditions: 23℃ ± 2℃ and 50% ± 6% rel. humidity. |
相关材料